Placing In The Same Position

There are two main methods of ensuring that the Tripod is placed in the correct position every time it is used.

Method 1 - Marked Center Point
With this method, the center location of the Tripod is permanently marked on the ground using i.e. a small paver stone, a pipe which is dug into the ground or a flat-headed tent peg.

Method 2 – Marked Leg Position
With this method, the position of each of the three legs is permanently marked on the ground using i.e. a small paver stone, a small pipe for each foot which is dug into the ground or a flat-headed tent peg.

Method 1 - Marked Center Point

Please note

For this operation, the Tripod's legs may need to be retracted depending on the operator's body height.

1. Setup the Tripod above the intended target spot
See also: Unfolding the legs and Extending the legs

2. Loosen the Platform's screw-lock with a counterclockwise rotation.

3. Remove the Platform.

4. From the top, look down through the column and position the Tripod above the intended target spot.

Method 2 - Marked Leg Position

1. Setup the Tripod.

2. Place each leg onto the marked positions.