# Accessories
# Antenna (29cm)
The Base Station's antenna is used to communicate with the Turf Tank One.
Product Specification
| Specification | Value |
|---|---|
| Length | 29,3cm (11,5”) |
# 12V Charger
The Charger is used to charge the built-in batteries of the Base Station.
To charge the Base Station, the Charging Cable is also required.
The Charger comes with a plastic bag containing the following Plug Adapters:
- EU (Europa)
- US (USA, Canada, Japan)
- AU (Australia, New Zealand)
- UK (England, Northern Ireland, Ireland, Scotland, Wales)
Prior to using the Charger, select the correct Plug Adapter (according to your local standard) and mount this on the Charger.
Product Specification
| Specification | Value |
|---|---|
| Model Type | GE24I12 |
| Input | 100-240VAC, 50-60Hz, 0,7A |
| Output | 12V DC, 2A |
| Wire Length | 100cm (39,4”) |
# Plug Adapters
Prior to using the Charger, select the correct Plug Adapter according to your local standard, and mount this on the Charger.
The Plug Adapters comes in a plastic bag in the following versions:
- EU (Europa)
- US (USA, Canada, Japan)
- AU (Australia, New Zealand)
- UK (England, Northern Ireland, Ireland, Scotland, Wales)
# Mounting The Plug Adapter
1. Slide the Plug Adapter into the Base Station Charger. From the side, slide the rips of the Plug Adapter into the slots of the Charger. Slide in the Plug Adapter until it makes a “click” sound.
# Removing The Plug Adapter
1. Press down on the heart-shaped Snap Lock.
2. Slide the Plug Adapter out of the Charger.
# Charging Cable
The Charging Cable and Charger is used together in order to charge the built-in batteries of the Base Station.
| Specification | Value |
|---|---|
| Length | 203cm (6ft 8") |
# Data Cable
The Data Cable is used for updating the Base Station's software.
Please note
It is not possible to charge the Base Station using the USB Plug and a computer.
| Specification | Value |
|---|---|
| Length | 104cm (41”) |
# Jumper Cable
To extend the operating time for the Base Station is it possible to use an external 12V battery as power supply. For this setup the Jumper Cable is needed.
Please note
When using the Jumper Cable for external power supply it is of paramount importance that the supply delivers no more than 12V.
| Specification | Value |
|---|---|
| Length | 185cm (72,8”) |
# Tripod
A professional and high-quality Tripod normally used by surveying professionals.
The purpose of the Tripod is to ensure a very stable and level platform for the Base Station, which is very important in order to achieve the best line marking result.
Further information about the Tripod can be found here: Tripod
# Prism Pole
A professional, light weight and high-quality Prism Pole normally used by surveying professionals.
The purpose of the Prism Pole is to ensure a stable and level platform for the Base Station. With a telescopic rod it is fast and easy to deploy.
For improved stability, is it always recommended to use the Prism Pole together with the Prism Pole Tripod.
Further information about the Tripod can be found here: Prism Pole
# Accessory Box
The Accessory Box is IP68-rated which means that it can withstand water, dust, dirt and sand, and thus can endure all kinds of weather conditions. With the foam inserts, the contents are highly protected against dropping the Accessory Box. If transporting the Accessory Box by airplane it may cause a vacuum within the box. This can make it difficult to open. The Accessory Box therefore contains a rotatable Pressure Release Valve used to release the formed vacuum.
Accessory Box contents:
- Base Station
- Base Station Power Adapter
- Plug Adapters For Base Station Power Adapter
- Base Station Charging Cable
- Base Station Data Cable
- Antenna For Turf Tank One
- Antenna For Base Station
- USB-A to USB-Mini B Adapter
- USB Memory Stick
- Base Station Jumper Cable
- Chamber Reducer For Solenoid (1pcs)
- Rubber Gasket, Ø18,3mm (2pcs)
- Spray Nozzle, Green (1pcs)
- Spray Nozzle, Orange (1pcs)
- Carry Strap For Accessory Box
| Specification | Value |
|---|---|
| Length | 42,5cm (16,7”) |
| Width | 32,5cm (12,8”) |
| Height | 16,7cm (6,6”) |
| Weight (content included) | 4,56kg (10lbs) |
| IP Rating | 68 |
# Carry Strap For Accessory Box
Carry Strap For Accessory Box which can be used instead of the Box's Carry Handle. The Carry Strap is mounted on the Accessory Box using the two metal plates. Length of Carry Strap can be varied.