Mounting On Prism Pole

Please note

• It is advised that the Base Station it not mounted on the Prism Pole until the Prism Pole have been installed in a pipe or otherwise secured, i.e. by using the Prism Pole Tripod.
• Prior to mounting the Base Station, remove the thread adapter from the Prism Pole top. The thread adapter is not needed for mounting the Base Station.
  Thread adapter is shown below.

1. Tighten the screw lock with a clockwise rotation to secure the Prism Pole.

2. Tighten the bottom and top collar lock with a clockwise rotation.

3. Place the Base Station onto the 5/8” thread of the Prism Pole

4. Rotate the Base Station clockwise to screw on.